gwj / at91sam9263 · Commits

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

In order to not execute code we just compiled, let's replace signrom
with a shell script that does the same thing while staying compatible
to pretty much every system available.

This should make cross-compilation for windows easier.

aliguori: fix build when objdir != srcdir

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

This reverts commit 707c0dbc.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

The performance of qcow2 has improved meanwhile, so we don't need to
special-case it any more. Switch the default to write-through caching
like all other block drivers.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

On reflection, perhaps it does make sense to set a default value for
the sndbuf= tap parameter.

For best effect, sndbuf= should be set to just below the capacity of
the physical NIC.

Setting it higher will cause packets to be dropped before the limit
is hit. Setting it much lower will not cause any problems unless
you set it low enough such that the guest cannot queue up new packets
before the NIC has emptied its queue.

In Linux, txqueuelen=1000 by default for ethernet NICs. Given a 1500
byte MTU, 1Mb is a good choice for sndbuf.

If it turns out that txqueuelen is actually much lower than this, then
sndbuf is essentially disabled. In the event that txqueuelen is much
higher, it's unlikely that the NIC will be able to empty a 1Mb queue.

Thanks to Herbert Xu for this logic.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Cc: Herbert Xu <herbert.xu@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Attached patch lets configure find xen headers and xen libs
when called with --extra-cflags and --extra-ldflags options.

Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

- MCE features are initialized when VCPU is intialized according to CPUID.
- A monitor command "mce" is added to inject a MCE.
- A new interrupt mask: CPU_INTERRUPT_MCE is added to inject the MCE.

aliguori: fix build for linux-user

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Add explicit padding to MIPS signal frame structures.

Signed-off-by: Paul Brook <paul@codesourcery.com>

Enable NPTL support for MIPS usermode emulation.

Signed-off-by: Paul Brook <paul@codesourcery.com>

Implement MIPS ll/sc instructions using atomic compare+exchange.

Signed-off-by: Paul Brook <paul@codesourcery.com>

Implement cpu_set_tls for MIPS.

Signed-off-by: Paul Brook <paul@codesourcery.com>

The clone syscall takes 6 args.

Signed-off-by: Paul Brook <paul@codesourcery.com>

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

* fix secondary bus setup.
 * use base->name instead of "FIXME" for device name.
   Yes, the device name is redundant.  Only for drivers converted
   to qdev already though.  Once all drivers are converted we can
   and should kill it.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

The only purpose DeviceType serves is creating a linked list of
DeviceInfo structs.  This removes DeviceType and add a next field to
DeviceInfo instead, so the DeviceInfo structs can be changed that way.
Elimitates a pointless extra level of indirection.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

BusInfo is filled with name and size (pretty much like I did for
DeviceInfo as well).  There is also a function pointer to print
bus-specific device information to the monitor.  sysbus is hooked
up there, I've also added a print function for PCI.

Device creation is slightly modified as well:  The device type search
loop now also checks the bus type while scanning the list instead of
complaining thereafter in case of a mismatch.  This effectively gives
each bus a private namespace for device names.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Paul Brook <paul@codesourcery.com>

Makes pci_qdev_register take a PCIDeviceInfo struct instead of a bunch
of parameters.  Also adds config_read and config_write callbacks to
PCIDeviceInfo, so drivers needing these can be converted to the qdev
device API too.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

the qemu_malloc routines

Fixes getrlimit implementation that overwrote the result of the syscall
instead of converting it

Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>

Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>

makes socketcall 64-bit clean so it works on 64-bit big-endian systems

Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>

pipedes is an address, it should not be signed (breaks for addresses
> 0x80000000)

Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>

linux-user=yes is not a reliable identifier that linux-user targets
have been selected. user targets can be selected via --target-list
as well.

Removes the following warning

CC    i386-linux-user/syscall.o
cc1: warnings being treated as errors
/media/nfs/qemu/linux-user/syscall.c: In function ‘do_syscall’:
/media/nfs/qemu/linux-user/syscall.c:2219: warning: ‘array’ may be used uninitialized in this function

Signed-off-by: Vibi Sreenivasan <vibi_sreenivasan@cms.com>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>

This patch is fixing following issues :

- commit 8fea3602 was applied to
  do_getsockname instead of do_accept.
- Some syscalls were not checking properly the memory addresses passed
  as argument
- Add check before syscalls made for cases like do_getpeername() where
  we're using the address parameter after doing the syscall
- Fix do_accept to return EINVAL instead of EFAULT when parameters
  invalid to match with linux behaviour

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>

There's a error When doing something like that :
find / -type f -print0 | xargs -0 echo

[ done in a arm chroot with qemu-arm and linux binfmt stuff or with
find / -type f -print0 | qemu-arm -L <path> <path>/usr/bin/xargs -0
echo ]

Doing this outsite qemu is fine. The problem was the huge number of
parameters. Increasing MAX_ARG_PAGES is fixing that.

While I was at it, I've modified linux-user/main.c to report error code
of loader_exec. It helps to debug/know what's wrong.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

For Sparc64, this fixes the PCI bridge configuration bugs revealed by the
improved bridge handling (b7ee1603).

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>

MADD was not correctly writing to HI.

MSUB/MSUBU are specified as `HI||LO - product', not `product - HI||LO'.

Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>