|
|
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
|
//#define DEBUG_SMBUS 1
#ifdef DEBUG_SMBUS
#define DPRINTF(fmt, args...) \
do { printf("smbus(%02x): " fmt , dev->i2c.address, ##args); } while (0)
#define BADF(fmt, args...) \
do { fprintf(stderr, "smbus: error: " fmt , ##args); exit(1);} while (0)
#else
#define DPRINTF(fmt, args...) do {} while(0)
#define BADF(fmt, args...) \
do { fprintf(stderr, "smbus: error: " fmt , ##args);} while (0)
#endif
enum {
SMBUS_IDLE,
SMBUS_WRITE_DATA,
SMBUS_RECV_BYTE,
SMBUS_READ_DATA,
SMBUS_DONE,
SMBUS_CONFUSED = -1
};
static void smbus_do_quick_cmd(SMBusDevice *dev, int recv)
{
DPRINTF("Quick Command %d\n", recv);
if (dev->quick_cmd)
dev->quick_cmd(dev, recv);
}
static void smbus_do_write(SMBusDevice *dev)
{
if (dev->data_len == 0) {
smbus_do_quick_cmd(dev, 0);
} else if (dev->data_len == 1) {
DPRINTF("Send Byte\n");
if (dev->send_byte) {
dev->send_byte(dev, dev->data_buf[0]);
}
} else {
dev->command = dev->data_buf[0];
DPRINTF("Command %d len %d\n", dev->command, dev->data_len - 1);
if (dev->write_data) {
dev->write_data(dev, dev->command, dev->data_buf + 1,
dev->data_len - 1);
}
}
}
|
|
|
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
|
{
SMBusDevice *dev = (SMBusDevice *)s;
switch (event) {
case I2C_START_SEND:
switch (dev->mode) {
case SMBUS_IDLE:
DPRINTF("Incoming data\n");
dev->mode = SMBUS_WRITE_DATA;
break;
default:
BADF("Unexpected send start condition in state %d\n", dev->mode);
dev->mode = SMBUS_CONFUSED;
break;
}
break;
case I2C_START_RECV:
switch (dev->mode) {
case SMBUS_IDLE:
DPRINTF("Read mode\n");
dev->mode = SMBUS_RECV_BYTE;
break;
case SMBUS_WRITE_DATA:
if (dev->data_len == 0) {
BADF("Read after write with no data\n");
dev->mode = SMBUS_CONFUSED;
} else {
if (dev->data_len > 1) {
smbus_do_write(dev);
} else {
dev->command = dev->data_buf[0];
DPRINTF("%02x: Command %d\n", dev->i2c.address,
dev->command);
}
DPRINTF("Read mode\n");
dev->data_len = 0;
dev->mode = SMBUS_READ_DATA;
}
break;
default:
BADF("Unexpected recv start condition in state %d\n", dev->mode);
dev->mode = SMBUS_CONFUSED;
break;
}
break;
case I2C_FINISH:
switch (dev->mode) {
case SMBUS_WRITE_DATA:
smbus_do_write(dev);
break;
case SMBUS_RECV_BYTE:
smbus_do_quick_cmd(dev, 1);
break;
case SMBUS_READ_DATA:
BADF("Unexpected stop during receive\n");
break;
default:
/* Nothing to do. */
break;
}
dev->mode = SMBUS_IDLE;
dev->data_len = 0;
break;
case I2C_NACK:
switch (dev->mode) {
case SMBUS_DONE:
/* Nothing to do. */
break;
case SMBUS_READ_DATA:
dev->mode = SMBUS_DONE;
break;
default:
BADF("Unexpected NACK in state %d\n", dev->mode);
dev->mode = SMBUS_CONFUSED;
break;
}
}
}
static int smbus_i2c_recv(i2c_slave *s)
{
SMBusDevice *dev = (SMBusDevice *)s;
int ret;
switch (dev->mode) {
case SMBUS_RECV_BYTE:
if (dev->receive_byte) {
ret = dev->receive_byte(dev);
} else {
ret = 0;
}
DPRINTF("Receive Byte %02x\n", ret);
dev->mode = SMBUS_DONE;
break;
case SMBUS_READ_DATA:
if (dev->read_data) {
ret = dev->read_data(dev, dev->command, dev->data_len);
dev->data_len++;
} else {
ret = 0;
}
DPRINTF("Read data %02x\n", ret);
break;
default:
BADF("Unexpected read in state %d\n", dev->mode);
dev->mode = SMBUS_CONFUSED;
ret = 0;
break;
}
return ret;
}
static int smbus_i2c_send(i2c_slave *s, uint8_t data)
{
SMBusDevice *dev = (SMBusDevice *)s;
switch (dev->mode) {
case SMBUS_WRITE_DATA:
DPRINTF("Write data %02x\n", data);
dev->data_buf[dev->data_len++] = data;
break;
default:
BADF("Unexpected write in state %d\n", dev->mode);
break;
}
return 0;
}
SMBusDevice *smbus_device_init(i2c_bus *bus, int address, int size)
{
SMBusDevice *dev;
|
|
|
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
|
dev = (SMBusDevice *)i2c_slave_init(bus, address, size);
dev->i2c.event = smbus_i2c_event;
dev->i2c.recv = smbus_i2c_recv;
dev->i2c.send = smbus_i2c_send;
return dev;
}
/* Master device commands. */
void smbus_quick_command(i2c_bus *bus, int addr, int read)
{
i2c_start_transfer(bus, addr, read);
i2c_end_transfer(bus);
}
uint8_t smbus_receive_byte(i2c_bus *bus, int addr)
{
uint8_t data;
i2c_start_transfer(bus, addr, 1);
data = i2c_recv(bus);
i2c_nack(bus);
i2c_end_transfer(bus);
return data;
}
void smbus_send_byte(i2c_bus *bus, int addr, uint8_t data)
{
i2c_start_transfer(bus, addr, 0);
i2c_send(bus, data);
i2c_end_transfer(bus);
}
uint8_t smbus_read_byte(i2c_bus *bus, int addr, uint8_t command)
{
uint8_t data;
i2c_start_transfer(bus, addr, 0);
i2c_send(bus, command);
i2c_start_transfer(bus, addr, 1);
data = i2c_recv(bus);
i2c_nack(bus);
i2c_end_transfer(bus);
return data;
}
void smbus_write_byte(i2c_bus *bus, int addr, uint8_t command, uint8_t data)
{
i2c_start_transfer(bus, addr, 0);
i2c_send(bus, command);
i2c_send(bus, data);
i2c_end_transfer(bus);
}
uint16_t smbus_read_word(i2c_bus *bus, int addr, uint8_t command)
{
uint16_t data;
i2c_start_transfer(bus, addr, 0);
i2c_send(bus, command);
i2c_start_transfer(bus, addr, 1);
data = i2c_recv(bus);
data |= i2c_recv(bus) << 8;
i2c_nack(bus);
i2c_end_transfer(bus);
return data;
}
void smbus_write_word(i2c_bus *bus, int addr, uint8_t command, uint16_t data)
{
i2c_start_transfer(bus, addr, 0);
i2c_send(bus, command);
i2c_send(bus, data & 0xff);
i2c_send(bus, data >> 8);
i2c_end_transfer(bus);
}
int smbus_read_block(i2c_bus *bus, int addr, uint8_t command, uint8_t *data)
{
int len;
int i;
i2c_start_transfer(bus, addr, 0);
i2c_send(bus, command);
i2c_start_transfer(bus, addr, 1);
len = i2c_recv(bus);
if (len > 32)
len = 0;
for (i = 0; i < len; i++)
data[i] = i2c_recv(bus);
i2c_nack(bus);
i2c_end_transfer(bus);
return len;
}
void smbus_write_block(i2c_bus *bus, int addr, uint8_t command, uint8_t *data,
int len)
{
int i;
if (len > 32)
len = 32;
i2c_start_transfer(bus, addr, 0);
i2c_send(bus, command);
i2c_send(bus, len);
for (i = 0; i < len; i++)
i2c_send(bus, data[i]);
i2c_end_transfer(bus);
}
|